How to calculate IFTA miles by state (deadhead included)

Also in ਪੰਜਾਬੀ · Punjabi

For IFTA, count every mile each truck traveled in each state during the quarter: loaded, empty (deadhead) and bobtail. The best source is GPS or ELD data, or trip sheets with odometer readings at the state lines. Then check that the state miles add up to the odometer change for the quarter.

A planned route from routing software is only an estimate. It is not a record of where the truck really went.

Which miles count

IFTA rule R266 defines total distance as all miles traveled by every qualified vehicle in your fleet during the quarter, "regardless of whether the miles... are considered taxable or nontaxable". See the IFTA Articles of Agreement.

Miles Count for IFTA?
Loaded miles Yes
Empty miles (deadhead) to a pickup Yes
Bobtail miles (no trailer) Yes
Miles to and from the shop or truck wash Yes
Personal trips in the truck Yes. The truck traveled them. "Personal conveyance" is an hours-of-service term, not an IFTA one
Miles while on a trip permit in a state No. Trip permit miles are left out of that state's IFTA distance (R224)

Some states treat certain miles as non-taxable, such as off-road miles. Those still go in total miles. The return has separate columns for total miles and taxable miles in each state.

Why every mile matters

Your MPG is total miles ÷ total gallons. Each state's share of the tax comes from its miles. If miles are missing, both numbers are wrong. In an audit, the auditor compares your miles to the odometer. Missing miles are easy to see and hard to explain. See what records survive an IFTA audit.

Three ways to get miles by state

1. GPS or ELD data

Most trucks already have an ELD. Many ELD companies offer a report of miles by state, worked out from GPS positions.

  • Good: automatic, covers every mile the engine runs, includes deadhead and bobtail.
  • Watch: GPS gaps when the signal drops or the device is unplugged. A truck used without the ELD logged in. Yard moves.

For an audit, GPS data has to meet IFTA rule P540.200: a position at least every 10 minutes with the engine on, with date, time, latitude, longitude, odometer and truck, as a spreadsheet or text file. The ELD's main job is hours of service. The state miles report is an extra, so check it.

2. Trip sheets with odometer readings

The classic way. For each trip, write the odometer at the start, at each state line, and at the end.

Point Odometer Miles in the state
Start: Fresno, CA 512,340
Arizona line 512,725 California: 385
New Mexico line 513,084 Arizona: 359
Texas line 513,457 New Mexico: 373
End: Dallas, TX 513,892 Texas: 435
Trip total 1,552
  • Good: simple, and it is real data from the truck.
  • Watch: it only works if you write every reading. One missed line means guessing.

3. Route estimates

Routing software can tell you the miles by state for a planned route.

  • Good: fast, useful to plan and to fill a gap.
  • Watch: your real route is different. Detours, closed roads, fuel stops off the interstate, a wrong exit, a scale bypass. A planned route on its own is not proof of the miles you ran. If you use it, check it against the odometer and your fuel stops, and fix it.

Check your miles against the odometer

Do this every quarter for every truck, before you file.

Worked example

Line Miles
Odometer on October 1, 2026 512,340
Odometer on December 31, 2026 541,250
Odometer change for the quarter 28,910
Miles by state from the ELD report 28,410
Gap 500

500 miles is missing from the state report, about 1.7%. Find out why before you file:

  1. Look for days with no GPS data. Was the device unplugged during a repair?
  2. Look for a trip that is missing, such as a bobtail to the shop.
  3. Check your fuel receipts. A receipt from a state with no miles that day means a gap.
  4. Add the missing miles to the right state, using trip sheets or the route you actually drove.

A small gap can come from yard moves. A big gap usually means a missing trip.

Use your fuel receipts as a check

Your fuel receipts show where the truck was on each day. If you bought fuel in Ohio on November 3, your state miles must show Ohio miles that day. This catches missing trips fast.

Same miles, other taxes

The same state miles are used for:

  • IRP plates. Your apportioned registration fees come from your share of miles in each state. See UCR and IRP registration.
  • Weight-distance taxes in Oregon, New Mexico, New York and Kentucky, and Connecticut's highway use fee. See weight-distance taxes.

Count them right once and three filings are right.

A quarterly checklist

  1. Write the odometer for every truck on the first and last day of the quarter.
  2. Get miles by state from your ELD, GPS or trip sheets.
  3. Make sure empty, bobtail and shop miles are in.
  4. Compare the total to the odometer change. Find every gap.
  5. Check fuel receipts against the miles by date.
  6. Save the GPS data as a spreadsheet file and keep trip sheets for 4 years.
  7. Use the miles to file. See how to file IFTA.

How PunjabiTrucker does this

PunjabiTrucker fills in miles by state for each load from your route and fuel stops, and marks them as estimated until you confirm them. You can correct any state, add empty and bobtail miles, and check the total against your odometer. The same miles feed your IFTA worksheet, your IRP miles and your weight-distance returns. See IFTA or try the IFTA calculator.

This is general information, not tax or legal advice.

Questions drivers ask

Do deadhead miles count for IFTA?

Yes. IFTA counts all miles the truck travels, loaded or empty. Deadhead, bobtail and miles to the shop all go in your total miles and in each state's miles.

Do personal conveyance miles count for IFTA?

IFTA counts every mile the qualified vehicle travels. Personal conveyance is an hours-of-service rule, not an IFTA rule, so those miles still go in your totals. Ask your base state if you are unsure.

Can I use my ELD for IFTA miles?

Yes, many carriers do. Check the ELD's state miles against your odometer every quarter, and keep the GPS data as a spreadsheet file. For an audit, it must have a position at least every 10 minutes with the engine on.

Can I use routing software for IFTA miles?

Only as a starting point. A planned route isn't proof of where the truck went. Check it against the odometer and your fuel stops, and correct it to the route you actually drove.

What if my state miles don't match my odometer?

Find the gap before you file. Look for days with no GPS data, missing trips, bobtail runs and shop trips. Add the missing miles to the right state.

Start free today

5 loads free. Then $20 a month for up to 5 trucks, and the first month is free.